0

Your Cart is Empty

T3SPC6 UTP RJ45 CAT6 SOLID SNAP PLUG 100 PACK 1.00MM TO 1.05MM 2692 T3 2692

The T3 SNAP PLUG™ and SNAP PLUG Tool is designed tosimplify the process of terminating RJ45 modular plugs. It is a time-consuming process to assemble traditional RJ45 modular plugs, and the most difficult part would be putting the wire into the conductor in correct order. The thicker the conductor is, the more difficult the job is going to be.

The T3 SNAP PLUG™ enables the conductors topass through the connector itself, making it a lot easier toverify wiring order before crimp, reducing possible errors and waste of materials.

Note: You may have the ethernet cable specified CAT6 or CAT6A, because we found the cable conductor sizes used are various from different manufactures or brands, if you want to make sure the snap plug works properly, please double-check the cable conductors' size is not larger than the size that the snap plug specified.

Rating Label

{tab FAQ}

I have a Platinum Tools crimper EZRJPROHD that was designed for the Platinum Tools EZ connectors. Can I use this crimper on the T3 Snap Plug?
The T3 products are designed with tight tolerances to work perfectly together. Platinum Tools manufacture their EZplugs in the US as opposed to Taiwan, so their matching crimper is designed to work with just their connectors. Having said this, in our samples, the Platinum crimper stillworked with T3 connectors. Below is a picture of the end result. Note the slight indentation (damage) on the T3 connector left by the Platinum Tools crimper. Please be aware, as the crimp tool is not designed for otherplugs, if you use it very often, your crimp tool will be worn out quickly.