Wharfedale Pro DP-4035I Amplifier

$1,189.00

Online Stock Only. Local pickup may be available on some items with prior arrangement. We Price Match please call in or text 04 5555 1974.

DP-I SERIES

4-CHANNELS OF POWER. PERFECT FOR FIXED INSTALL.

With the DNA from our DP series, the new DP-4035i has the hardware features for installation.

Made for installation
GPIO connections
4-channel operation
2 Ohm stability
100 V / 70 V operation
Low impedance operation
Switchable input sensitivity
Wide range AC input

DP-4035I

4 channels
8 Ohm 4 x 450 W
4 Ohm 4 x 765 W
2 Ohm 4 x 1300 W
16 Ohm Bridged 2 x 900 W
8 Ohm Bridged 2 x 1530 W
4 Ohm Bridged 2 x 2600 W
100 V Hi-Z 4 x 765 W
70 V Hi-Z 4 x 450 W

GPIO

The rear panel connectors allow for Remote Level adjustment. A 10 kΩ potentiometer (not supplied) connected to the LEVEL Connectors gives remote volume control.

All the connectors needed for quick and easy installation are included with the DP-4035i.

REMOVABLE GRILLE

The front grille is secured with magnets and is removable. This reduces the risk of tamper …….plus makes cleaning simple.

MODE SWITCHING

Rear panel DIP switches give access to the DP-4035i system configuration.

Switch the sensitivity between 0.775 V and 1.0 V or select the Lo-Z / Hi-Z operation mode.

70 V / 100 V READY

In this high impedance system example, the DP-4035i can drive up to 80 pcs of i8T loudspeakers in a 100 V system (20 per channel tapped at 25 w). This configuration can also drive LESS than 80 pcs of i8T. Any number between 1 and 80 !  

Required Amplifier settings –

Set DP-4035i mode switch to “High Z 100 V”

HPF is set at 40 Hz by the amplifier automatically to avoid low frequency transformer saturation.

Limiters are set automatically for 70 V or 100 V power output.

DSP limiters should also be set to the total power and impedance of the speakers connected.

SPECIFICATIONS

Model		DP-4035i
Rated Power (THD=1%,Each channel works simultaneously with continuous sinusoidal 1 KHz)	8 Ω	4 x 450 W
	4 Ω	4 x 765 W
	2 Ω	4 x 1300 W
	16 Ω / Bridge	2 x 900 W
	8 Ω / Bridge	2 x 1530 W
	4 Ω / Bridge	2 x 2600 W
	100 V Hi-Z	4 x 765 W
	70 V Hi-Z	4 x 450 W
Input Sensitivity		Selectable:1 V, 0.775 V
THD+N		Typical:0.05%. (10% Rated Power, 8Ω)
Cross-Talk		≥90 dB (20 Hz-1 KHz, Below Rated Power)
Frequency Response		Typical:±0.5 dB (10% Rated Power, 20 Hz-20 KHz, Lo-Z, 8Ω) Typical:±0.5 dB (10% Rated Power, 40 Hz-16 KHz, Hi-Z)
Input Impedance		20 kΩ (Balanced)10 kΩ (Unbalanced)
Damp Factor		Typical:300 (20 Hz-200 Hz, Lo-Z, 8Ω)
SNR		≥100 dB (A weighted, 20 Hz-20 KHz, 8Ω)
Main Power		100~240 V AC ±10%，50/60 Hz
Protection		Protection: Under voltage, DC, Over temperature; Limiter: Over temperature, Over load, Short.
Size		483 x 45 x 370 mm (W×H×D)
Net Weight		8.4 kg

Please Note: Shipping quoted is an estimate only. We will contact you with a quote for actual shipping charges to your location if necessary.

Wharfedale Pro DP-4035I Amplifier

Related Items